Rapid-setting water plugging mortar
Rapid-setting water plugging mortar. It stops active water leaks within seconds. Used for the emergency repair of water leaks in concrete, stone and brick structures. Ideal as a preliminary treatment in crystalline waterproofing applications.
Get a tailored price quote based on your project details
Cement-based rapid-setting powder water plug
Grey powder
1.07 ± 0.1 g/cm³
2 – 3 seconds
Dry powder, pressed by hand
Against the direction of flow
None
Free of soda and chloride
+5 °C / +30 °C
−20 °C / +80 °C
2 – 4 kg/m²
5 kg · 10 kg · 25 kg
Values are typical figures obtained at +23 °C / 50% relative humidity.
N111 Stop sets in 2 – 3 seconds. The dry powder is compressed in the palm and pressed directly against the running water, held by hand until the flow stops. The setting time may vary slightly with water and ambient temperature.
Yes — N111 Stop is the most effective product for pressurised point leaks. N112 Stop F is not a replacement for it but is used for a different job: filling tie-rod holes, bulky cavities and cracks of irregular cross-section.
Yes, N111 Stop is typically used as a preliminary treatment before applying Crystal 2K. Active leaks are first stopped with N111, and permanent waterproofing is then achieved with Crystal 2K.
Contact us for detailed information, consumption rates and a price quote for N111 Stop.
